Roof hatches are commonly installed to provide access to a building’s roof for the purpose of maintaining HVAC systems and other equipment that’s set on the roof. In commercial establishments, roof access hatches allow for easier installation or removal of huge equipment or its components. However, the advantages of having roof access hatches go beyond the aforementioned uses.
For instance, if you want to have a “green building” and have a garden on your roof top, you will need to install a roof access hatch in order to get to your greenery and maintain it on a regular basis. Having a roof access hatch can also be a safety feature if a flood emergency ever occurs. You have probably heard people getting trapped inside their homes because of flooding and trying to create holes on their roof so that they can reach their rooftops and be rescued from there. Doing this can lead to accidents and may even cause more harm than good. You can avoid this by installing roof access hatches. In the case of a flood emergency, you can simply open these hatches and get to safety.
Roof access hatches come in a variety of materials, but the most durable ones are made with aluminum or galvanized steel. Aluminum roof hatches can be as long lasting as their stainless-steel counterparts, provided that they have been made to meet the highest standards. Aluminum hatches are also recyclable and they do not rust or corrode when they’re maintained and cared for properly.
When looking for a company to buy your roof access hatches from, choose one that will customize the hatches to meet your specifications. The frames must be fully-welded, and the hatches are supposed to be equipped with shock absorbers. Go for a supplier that provides roof hatch ladders as well so that you can buy everything you need under one roof.
Blog Source URL: https://www.amazingdoors.us/blog/why-do-we-need-roof-access-hatches/
Louvered steel doors have slats that are difficult to reach, and this characteristic makes them susceptible to collecting dirt and debris. Cleaning these louvers may seem like a laborious task, but you can make things easier by following these steps:
- The first thing you need to do is to get your cleaning materials ready. Most of the cleaning can be easily done with the use of a soft-bristled paint brush. If you don’t have one, you can just use a sturdy ruler instead. Wrap one of its ends with a rag (or a sock that you no longer use) and use a rubber band to secure the cloth or rag in place. The other two materials that you will need are soap and water.
- The next step is to dust the steel door louvers clean with the dry paint brush. Sliding the bristles between each louver will help get off dust and debris from the inclined surfaces. Alternatively, you can use the ruler with cloth to do this step if you do not have the brush. Insert it between the louvers and drag it across each of them to remove dirt. The ruler + cloth method is going to take longer, but it is effective nonetheless.
- Next, create a water-and-soap solution to be used on the louvers. This will help remove the gunk, dirt, and grime that have built up on the slats. To use the solution, just dip your paint brush or ruler with cloth into the soap solution and wash the louvers with it. Focus on the areas that are noticeably dirty and make sure to drag the brush/ruler from edge to edge. If you don’t want to be dipping the paint brush into soapy water every now and then, you can just fill a spray bottle with the solution and spray it onto the louvers.
- After you have soaped the louvers, you can then rinse them with clean water. Don’t pour water on your door. Instead, just dip the brush/ruler into the fresh water and run it on every slat.
Blog Source URL: https://www.amazingdoors.us/blog/how-to-clean-steel-door-louvers/
A door lite helps add light and perhaps ventilation as well, and allows light and ventilation needs to be met. It can also give a particular space a bigger and brighter feeling. Some door lites come with interesting designs, and some even have an internal blind to enhance privacy. A door panel’s surround insert is composed of 3-pieces: the exterior molding, interior molding, and glass sandwich. Over the years, door lites may wear down and need to be replaced.
When replacing door lites, you have two options—either you replace the whole surround component (glass and frame), or you only replace the glass frame and reuse the original glass. There are four measurements that you must take note of when replacing door lites.
The required measurements are the following:
- Glass size – Width and height of glass within surround (get the measurement of the entire glass and not just the visible part)
- Glass thickness – Thickness of the glass sandwich
- Tip to tip – Height and width of the outer edge of the rim
- Cut-Out size: Width and height of cut-out in door
Replacing an existing door lite is a relatively easy task, although it can get a bit complicated if cutting into steel is required. If you don’t feel at ease using a jigsaw, it will be best if your hire the services of a professional. Also, remember to be extremely careful when handling glass. Here are the steps in replacing an existing door lite:
- Remove screws from the existing door lite trim. Remove the trim from both sides of the door and remove the glass as well. It’s best if you have someone on each side of the door so that the glass won’t slip.
- Insert the replacement door lite trim in one side’s opening. Next, insert the glass from the other side and put the other trim piece in place.
- Install the door lite with the screw holes inside. Cover the screw holes with cap covers for a finished look.
Blog Source URL: https://www.amazingdoors.us/blog/points-to-be-kept-in-mind-while-replacing-door-lites/
Louvered vents are prone to collecting debris and dirt because of the hard-to-reach slats. Cleaning these vents may seem cumbersome, but the following tips should make the task easier:
- First, you have to prepare your cleaning materials. You will need a soft-bristled paint brush to do most of the cleaning. If you do not have one, you may just get a sturdy ruler and wrap a rag (or an expendable sock) around one end. Secure the rag or cloth in place using a rubber band. You’ll also need to have water and soap.
- Use the dry and soft-bristled paint brush to dust the aluminum vent louvers clean. The bristles will help remove dust from the inclined surfaces by sliding between each louver. In case you do not have a brush, you may alternatively use the ruler with a rag wrapped around its end and insert it between the louvers. The ruler and rag method is going to take longer if you’re going to use a brush, but it will still do the trick and leave the louvers clean and free from dust. Thoroughly remove any dust from between the slats.
- To remove the grime and dirt that has built up on the louvers, it’s best to mix up soap and water to create a solution. Simply dip the same brush into the soapy water and wash the louvers. Another way to do this is to transfer the solution into a spray bottle and spray the louvers with the soapy water. Use the brush to get off the grime and focus on noticeably dirty areas. You may also use the rag and ruler technique to accomplish this. The louvers will be just as clean, but it’s going to take longer.
- Once you’re done soaping the louvers, it’s time to rinse them with fresh water. To do this, just dip the brush or the ruler with rag into clean water and run them on each louver.
Blog Source URL: https://www.amazingdoors.us/blog/tips-to-clean-aluminum-vents-louvers-perfectly/
Door lite inserts are decorative panels that add light and sometimes, ventilation to doors. They create an airier and brighter feeling in homes and they are used to create focal accents and customize entryways to a home owner’s liking. Whether you are shopping for a new main door or a patio door, knowing your way around different types of doors available in the market is important so you can make an informed decision as you browse through your options online. Here are some important things you should definitely know when shopping for doors and door lite inserts:
- Doors can be classified according to the way they open and the location of their hinges. Inswing doors are doors that open in, while outswing doors are doors that open out. Left hand doors hinge on the left, while right hand doors hinge on the right when viewed from the exterior of the house.
- Glass door accents are commonly referred to as lites. They are glass panes that fit into the door as decorative or functional additions. Divided lite are panes of glass that appear to be or actually are divided into various sections. Grilles on the other hand are wooden, plastic, or metal assemblies that give the divided appearance to door lites. Caming is the term used for the strips used to join segmented glass in a door lite.
- When customizing your door, choosing the right type of decorative glass is important to achieve the effect that you desire. Most door lites use insulated glass to ensure energy efficiency, but for decorative purposes, you may need to choose from stained, silk screened, or beveled glass, depending on the design you are going for. Glass door lites can either be one continuous lite or grilled, which create the appearance of several separate lites.
Blog Source URL: https://www.amazingdoors.us/blog/what-do-you-mean-by-door-lite-inserts/
Door hinges are more than just mechanical bearings that connect doors to the door frame. In fact, they come in a variety of types, designed to hold up and make different kinds of doors work. The double acting pivot hinge is mainly used on swinging doors, helping them open and shut ever so smoothly. When it comes to selecting the best hinge for your application, the quality of the metal used is just as critical to consider as the actual mechanism of the hinge. They are also made so that they can provide support and at the same time maintain an attractive finish. Double acting pivot hinges are primarily designed for heavy swinging doors, but various door applications may require specific types of double acting pivot hinges to ensure effortless weight control and handling, and high precision:
- Mortised double acting hinged pivots are preferred for applications when lesser movement of the hinge is required. These hinges are cut to the exact size to ensure a snug fit into the door recess. This allows for less jarring movements and shock, which adds to the door’s life and helps maintain smooth movement for a longer period of time.
- Double acting pivot hinges are also ideal for supporting double handed and self-closing doors. They are especially useful in high-traffic situations where large number of people require easy entry to an establishment. High speed and constant foot traffic often calls for self-shutting doors that close automatically. The double acting pivot hinge allows for this heavy-duty action and ensures smooth movement so that the door does not slam shut every time people would pass by.
- Heavy weight doors need proper support so they can provide the level of protection that is expected out of them. Main doors that lead into homes, offices, and commercial spaces are sometimes as heavy as 75 pounds. The wrong type of hinge cannot provide proper support that this kind of weight needs. Double acting pivot hinges are made specifically for heavy weight swinging doors and are rated not to break and groan under heavy load. They can effortlessly take the weight and make heavy doors swing back and forth smoothly without squeaks and screeches.
- Double acting pivot hinges are also designed for applications that may require spring tension reactivation. They include reactivation mechanisms that allow users to adjust spring tension to maintain the smooth function of the accessory. These adjustable hinges are especially useful in doors that automatically shut.
Blog Source URL: https://www.amazingdoors.us/blog/major-applications-of-double-acting-pivot-hinge/
Floor access panels are designed to provide easier and safer entry to the roof level of a building when a stairwell leading up and out is not available. These hatches may also be used in addition to stairs in larger settings where multiple entry and egress points are desired. Often necessary for routine building maintenance and upkeep when any mechanical equipment is housed on a roof, floor access panels must be selected and installed with care to ensure the structural integrity of the building. Buyers, however, will find there are several basic types available, which means careful consideration should go into the selection.
Floor access panels are typically available in these types:
- Aluminum – This roof access hatch design is one of the most commonly used in many settings. Aluminum is often preferred because of its overall durability and its rust and corrosion resistance qualities. Easy to care for and sturdy by design, an aluminum floor access panel may be suitable for use in residential and some commercial and industrial settings.
- Galvanized steel – In some settings, galvanized steel may be required as a matter of code. This material is sometimes favored because of its inherent strength and its ability to stay a little cooler than aluminum, which enables it to conserve energy.
- Hurricane-rated hatches – In some regions, a hatch that is rated to withstand hurricane-force winds might provide the best choice. Combining the ease of access of an ordinary hatch with a more rigid design, this higher-end solution is designed to perform in the harshest of conditions.
- Panels with additional safety features – Floor access panels may also be purchased in galvanized or aluminum styles with extra safety features built in. Safety railings, for example, and warning lights that signal when a hatch has been left open can be important considerations.
A floor access hatch provides for fast, safe access from a building’s uppermost level to its roof. When selecting a hatch for installation, be sure to understand what qualities are best suited for the intended application and what might be required as a matter of building code. Whether aluminum or galvanized, properly constructed hatches are designed to enable access without compromising safety or building integrity in the process.
Blog Source URL: https://www.amazingdoors.us/blog/know-about-the-different-types-of-floor-access-panels-b2753c/